How to Easily Install and Link Govee Lights

Whether you’re a fan of LED light strips or simply want to add some flair to your living space, Govee lights are a fantastic choice. In this article, we’ll walk you through the step-by-step process of cutting Govee lights and seamlessly connecting them together.

How to Cut Govee LED Strip Lights

When it comes to cutting Govee lights, you have the flexibility to choose the perfect length for your desired location. There’s no specific dimension you must adhere to. Simply measure the area where you want to install the Govee lights, and that will determine your cutting point.

Each Govee light strip has designated cutting points that won’t damage the wiring. You’ll notice copper dots surrounding the cut, indicating the correct spot. Follow these straightforward steps to cut your Govee lights:

Note: Avoid cutting the copper dots, as this will disconnect the Govee led light and disrupt the flow of electricity from one end to the other.

Tip: For a trial run, try cutting a small section of the Govee lights using the steps above, and connect it. Then, proceed to cut the actual length once you’re confident in the process.

How to Seamlessly Connect Govee Lights Together

Now that you’ve successfully cut your Govee lights to the appropriate size, it’s time to connect them together. For this task, we recommend using a quick connector, which simplifies the connection process and ensures a secure joint. Follow these instructions on how to connect Govee lights using a quick connector:

Find a quick connector online or at your local store.
Remove 0.125cm of the plastic bar from the LED quick connector, which is 0.32cm in total length.
The quick connector consists of two wires, with red and black indicators.
Turn the copper dot to the other side and locate the “+” and “-” symbols on the best LED light strips.
Connect the quick connector’s black wire to the “-” symbol and the red wire to the “+” symbol.
Peel off approximately 0.25cm of the wire LED adhesive cover, exposing the copper for connecting the Govee lights to the connector. If the cover is plastic, use a cutter to remove part of it.
Connect the copper dots and the quick connector together.
Attach both the quick connector and terminal wire to the power source.
Use an appropriate screwdriver to secure the wires in the quick connector, ensuring a tight connection without damaging the wires.

Once you’ve successfully connected your Govee lights using the quick connector, you can start placing them at the desired location to enhance your room’s ambiance.

How to Connect Govee Lights Together without a Quick Connector

If a quick connector isn’t included with your Govee lights package or you prefer an alternative method, you can still connect them without additional purchases. All you’ll need is a soldering iron or soldering machine.

Here’s how you can connect your Govee lights without a quick connector:

Remove the adhesive or plastic cover from the back of the copper dots on the LED strip.
Plug your soldering iron into a power source and wait for it to heat up.
Connect the two wires together by soldering them according to the wiring instructions: black wire to black and red wire to red, ensuring you match negative to negative and positive to positive.
Once the terminals are connected, you can roll both wires to create a tidy and professional-looking connection.
Place the connection on a metal surface and apply some solder lead to coat the terminals, ensuring a smooth and secure connection.
Allow the lead to dry, resulting in both wires being coated in a sleek aluminum finish.
Once the connection is cool, plug the Govee LED strips into a power source to confirm that the connection is solid.

Knowing how to cut and connect Govee LED lights is essential for achieving your desired lighting arrangement without any hassle or damage to the strips. By following this comprehensive guide, you’ll be able to effortlessly customize your living space with stunning Govee lights.