Features of Atlas Copco Air End

1.Using standard Atlas Copco profile (SAP), the rotor adopts 4/6 tooth combination, and the diameter of the rotor is equal. Compared with 5/6 tooth (Sigma) or 4/5 tooth (Cyclon) combination, the female rotor has higher rigidity , So it is not easy to deform, and the internal leakage loss is small.

2.SAP type line: due to compression force, it contacts the trailing edge of the tooth side. The gap of the rotor seal line is small. The outlet hole at the exhaust end is small (small leak triangle). Small internal leakage and loss. Higher internal pressure ratio (10bar). Improved efficiency, especially in 10 and 13 bar models with larger rotor diameters.

3.The oil seal and gas seal keep a small gap but do not contact the shaft, and its sealing efficiency, reliability and life are far better than the general labyrinth seal or mechanical seal. A.C. There is a small leakage hole E between the oil seal and the gas seal, which can still provide compressed air in case the seal is damaged.

4.Gearbox: It can reduce more energy consumption and cost. The axial force generated by the gear counteracts the axial force acting on the male rotor. Direct drive does not have this advantage.

5.Keep the temperature lower

Atlas Copco Air End Supplier - Youteng Machinery

Wuxi Youteng Machinery Co., Ltd. is a professional atlas copco air end manufacturer, we have many models of easy and simple to handle air compressor end, and there may be no way to show them one by one on the website. If yo are interested in atlas air compressor ends or other Atlas air compressor parts, please contact us directly if you need more.